Hanchi Auto Parts
5037701 Water Pump Suitable for Scania High Quality
Couldn't load pickup availability
The OE number 5037701 identifies a water pump fitted to the specified engine range. We stock a direct replacement built to the same shaft and pulley heights. One pump weighs 8.50 kg; a full carton holds 2.
Which engines use the 5037701 water pump?
This pump was designed for the listed engine applications.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
What are the specifications of 5037701?
| Parameter | Value |
| OE number | 5037701 |
| Fits brand | Scania |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 0.8 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | No leakage detected under negative pressure of 0.1 MPa |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight of one | 8.50 |
| Units per Carton | 2 |
| Gross Weight | 19.00 |
| Measurement | 51.5 x 29 x 26 cm |
| Net weight | 8.50 kg |
| Packing | 2 pcs/ctn, 19.00 kg gross |
Packing and quality checks
Each pump is packed individually; a master carton holds 2 pieces at 19.00 kg gross.
We leak-test each unit at a negative pressure of 0.1 MPa, then spin it by hand to confirm free rotation.
Frequently asked questions
What vehicles or engines does 5037701 fit?
5037701 fits the specified engine range. It is a Scania application water pump, and our aftermarket unit replaces it directly.
Is 5037701 available from stock?
Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.
How much does the 5037701 water pump weigh?
One pump weighs 8.50 kg net. A full carton of 2 pieces comes to 19.00 kg gross.
How do I confirm 5037701 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.
OEM Avalible
Our company understands the challenges of bringing some special parts from paper to reality. Therefore, we offer our services to customers that need help.