Hanchi Auto Parts
1K576-73032 Water Pump Suitable for Kubota V1505 D1105 NEW High Quality
Couldn't load pickup availability
If your parts book shows 1K576-73032, you need a water pump for V1505 D1105 NEW engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include —.
Which engines use the 1K576-73032 water pump?
This pump was designed for V1505 D1105 NEW.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
What are the specifications of 1K576-73032?
| Parameter | Value |
| OE number | 1K576-73032 |
| Fits brand | Kubota |
| TO Impeller height Ⅱ | 17.96 |
| TO Shaft head height | 91.4 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 81.1 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | No leakage detected under negative pressure of 0.1 MPa |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | KU118-WD-1 |
| Net weight | 0.85 kg |
| Packing | 12 pcs/ctn, 12.20 kg gross |
Packing and quality checks
Packing runs 12 pumps per carton, 12.20 kg gross weight, carton size 43.5 x 26.8 x 30.3 cm.
Every pump leaves the line after a leak test at a negative pressure of 0.1 MPa. No leaks, no exceptions.
Frequently asked questions
What vehicles or engines does 1K576-73032 fit?
1K576-73032 fits V1505 D1105 NEW engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
Is 1K576-73032 available from stock?
Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.
How much does the 1K576-73032 water pump weigh?
One pump weighs 0.85 kg net. A full carton of 12 pieces comes to 12.20 kg gross.
How do I confirm 1K576-73032 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.
OEM Avalible
Our company understands the challenges of bringing some special parts from paper to reality. Therefore, we offer our services to customers that need help.