Hanchi Auto Parts
J211-0610S Water Pump Suitable for Isuzu 3KR1 3KR2 High Quality
Couldn't load pickup availability
If your parts book shows J211-0610S, you need a water pump for 3KR1 and 3KR2 engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include —.
Which engines use the J211-0610S water pump?
Fitment covers 3KR1; 3KR2.
Match your engine model to the list and the pump will fit without rework.
What are the specifications of J211-0610S?
| Parameter | Value |
| OE number | J211-0610S |
| Fits brand | Isuzu |
| TO Shaft head height | 95.4 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M8X1.25 |
| Flange thread | 4-M6X1 |
| TO Flange height | 88.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Air tightness testing | No leakage detected under negative pressure of 0.1 MPa |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | IS166-WD-1 |
| Net weight | 1.80 kg |
| Packing | 4 pcs/ctn, 9.50 kg gross |
Packing and quality checks
Each pump is packed individually; a master carton holds 4 pieces at 9.50 kg gross.
Air-tightness is checked pump by pump under a negative pressure of 0.1 MPa before packing.
Frequently asked questions
What vehicles or engines does J211-0610S fit?
J211-0610S fits 3KR1 and 3KR2 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
Is J211-0610S available from stock?
Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.
How much does the J211-0610S water pump weigh?
One pump weighs 1.80 kg net. A full carton of 4 pieces comes to 9.50 kg gross.
How do I confirm J211-0610S is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.
OEM Avalible
Our company understands the challenges of bringing some special parts from paper to reality. Therefore, we offer our services to customers that need help.