Hanchi Auto Parts
1J700-73030 Water Pump Suitable for Kubota V2607 EC60 High Quality
Couldn't load pickup availability
If your parts book shows 1J700-73030, you need a water pump for V2607, EC60, V2607-DI-ET06 and other listed engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include 1G772-73030, 1G772-73034, 1J700-73034.
Which engines use the 1J700-73030 water pump?
The OE application list reads: V2607; EC60; V2607-DI-ET06.
Match your engine model to the list and the pump will fit without rework.
What are the specifications of 1J700-73030?
| Parameter | Value |
| OE number | 1J700-73030 |
| Fits brand | Kubota |
| TO Shaft head height | 93.8 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 85.5 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | No leakage detected under negative pressure of 0.1 MPa |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | KU111-WD-1 |
| Net weight of one | 1.05 |
| Net weight | 1.05 kg |
| Packing | 8 pcs/ctn, 10.40 kg gross |
What part numbers interchange with 1J700-73030?
Dealers and fleet systems quote this pump under more than one OE number:
- 1G772-73030
- 1G772-73034
- 1J700-73034
Packing and quality checks
Logistics data: 8 pcs/ctn, 10.40 kg gross, 40.8 x 36 x 38.5 cm.
Every pump leaves the line after a leak test at a negative pressure of 0.1 MPa. No leaks, no exceptions.
Frequently asked questions
What vehicles or engines does 1J700-73030 fit?
1J700-73030 fits V2607, EC60, V2607-DI-ET06 and other listed engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1J700-73030?
1J700-73030 interchanges with 1G772-73030, 1G772-73034, 1J700-73034. All of these refer to the same water pump assembly.
Is 1J700-73030 available from stock?
Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.
How much does the 1J700-73030 water pump weigh?
One pump weighs 1.05 kg net. A full carton of 8 pieces comes to 10.40 kg gross.
How do I confirm 1J700-73030 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.
OEM Avalible
Our company understands the challenges of bringing some special parts from paper to reality. Therefore, we offer our services to customers that need help.