211028200 Water Pump Suitable for Scania impeller 104.8 SCANIAP-Serie9.3D11 High Quality

211028200 is a Scania water pump OE number. Our replacement matches the same mounting and cooling specs, fits impeller 104.8 and SCANIAP-Serie9.3D11 engines, and ships with a 2.62 kg net weight (4 pcs per carton). Cross numbers: 0570959, 0570964, 0570965, 1533783, 1546188 and 3 more.

Which engines use the 211028200 water pump?

This pump was designed for impeller 104.8; SCANIAP-Serie9.3D11.

When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.

What are the specifications of 211028200?

What part numbers interchange with 211028200?

Parts books from different markets list this pump under several numbers. All of them point to the same unit:

• 0570959
• 0570964
• 0570965
• 1533783
• 1546188
• 1570959
• 1787120
• 1789522

Packing and quality checks

Logistics data: 4 pcs/ctn, 12.40 kg gross, 58 x 44 x 21 cm.

Every pump leaves the line after a leak test at a negative pressure of 0.1 MPa. No leaks, no exceptions.

Frequently asked questions

What vehicles or engines does 211028200 fit?

211028200 fits impeller 104.8 and SCANIAP-Serie9.3D11 engines. It is a Scania application water pump, and our aftermarket unit replaces it directly.

What other part numbers replace 211028200?

211028200 interchanges with 0570959, 0570964, 0570965, 1533783, 1546188, 1570959 and 2 more. All of these refer to the same water pump assembly.

Is 211028200 available from stock?

Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.

How much does the 211028200 water pump weigh?

One pump weighs 2.62 kg net. A full carton of 4 pieces comes to 12.40 kg gross.

How do I confirm 211028200 is the pump I need?

Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.

Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.

Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.