Hanchi Auto Parts
352-0205 Water Pump Suitable for Caterpillar C1335teeth For EXCAVATOR E345DL Parts High Quality
Couldn't load pickup availability
The OE number 352-0205 identifies a water pump fitted to C1335teeth, For EXCAVATOR E345DL Parts, 349D2 and other listed engines. We stock a direct replacement built to the same shaft and pulley heights. One pump weighs 9.22 kg; a full carton holds 2.
Which engines use the 352-0205 water pump?
This pump was designed for C1335teeth; For EXCAVATOR E345DL Parts; 349D2.
Any engine on this list takes our replacement as a straight swap.
What part numbers interchange with 352-0205?
Depending on the catalog you use, the same pump shows up as:
- 228-5812
- 293-0818
- 3520205
- 3520206
- 376-4216
- CH12887
What are the specifications of 352-0205?
| Parameter | Value |
| OE number | 352-0205 |
| Fits brand | Caterpillar |
| TO Shaft head height | 44.5 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Gear height | 29.3 |
| TO Impeller height Ⅰ | 8.27 |
| Air tightness testing | No leakage detected under negative pressure of 0.1 MPa |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 35 |
| Included Component 1 | O120X3.1-3 |
| Net weight of one | 9.22 |
| Net weight | 9.22 kg |
| Packing | 2 pcs/ctn, 20.45 kg gross |
Packing and quality checks
Logistics data: 2 pcs/ctn, 20.45 kg gross, 51.5 x 29 x 26 cm.
Every pump leaves the line after a leak test at a negative pressure of 0.1 MPa. No leaks, no exceptions.
Frequently asked questions
What vehicles or engines does 352-0205 fit?
352-0205 fits C1335teeth, For EXCAVATOR E345DL Parts, 349D2 and other listed engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 352-0205?
352-0205 interchanges with 228-5812, 293-0818, 3520205, 3520206, 376-4216, CH12887. All of these refer to the same water pump assembly.
Is 352-0205 available from stock?
Yes, this number is in regular production. Lead time for carton quantities is usually a few days; ask us for current stock before ordering.
How much does the 352-0205 water pump weigh?
One pump weighs 9.22 kg net. A full carton of 2 pieces comes to 20.45 kg gross.
How do I confirm 352-0205 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
Send the OE number, your quantity and your destination port — feel free to Contact Us. We reply with fitment confirmation and a quote.
OEM Avalible
Our company understands the challenges of bringing some special parts from paper to reality. Therefore, we offer our services to customers that need help.